《材料研究与应用》编辑部欢迎您!
加入收藏 | 设为主页 
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG113

基金项目:

国家高技术研究发展计划(863计划)(2001AA335010)


Effect of strain rate on microstructure and mechanical properties of a Mg-9Li-2Zn alloy sheet
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    Abstract:

    A two-phase Mg-9Li-2Zn alloy sheet is made by cold-rolling at room temperature, and the formability of it at room temperature is investigated in this study. Uniaxial tension tests are carried out for various strain rates between 0. 5 mm/min and 250 mm/min, and the microstructural changes during the tests are observed. The sheet has high formability at comparatively low strain rates. Maximum elongation amounts to 40,. However, ductility decreases with the increase of strain rate. Even at room temperature, the stress is also sensitive to the strain rate. There are many large dimples at comparatively low strain rates, and small dimples occur at high strain rates, it shows fine sub-grains come into being.

    参考文献
    相似文献
    引证文献
引用本文

LI Hong-bin, YAO Guang-chun, LIU Yi-han, JI Hai-bin.[J].材料研究与应用,2005,(2).

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-04-26
  • 出版日期:
文章二维码
材料研究与应用 ® 2025 版权所有