生物可降解封堵器中锡残留量的检测方法

Determination Method of Tin Residue in Biodegradable Occluder

摘要:

为准确测定生物可降解封堵器中微量残留的锡，采用石墨炉原子吸收法（GFAAS）和电感耦合等离子体原子发射光谱法（ICP-AES）对生物可降解封堵器产品中锡残留量进行测定，最后就两种检测方法进行对比分析。测定结果表明：两种检测方法均能达到准确测定的条件要求，测试值接近分别为27和31 μg?g^-1，显著低于行业标准限量值150 μg?g^-1；相比于ICP-AES法，GFAAS法具有更低的检出限、定量限，以及更高的精密度，因而更加适用于生物可降解封堵器产品中锡残留量的测定。两种检测方法均具有分析快速、准确、便捷和准确性好等特点，可为相关标准方法研究及方法精密度和准确度评定提供参考。

Abstract:

In order to accurately determine trace residual tin in biodegradable occluders， graphite furnace atomic absorption spectrometry （GFAAS） and inductively coupled plasma atomic emission spectrometry （ICP-AES） were used to determine the residual tin content in biodegradable occluder products. Finally， the two detection methods were compared and analyzed. The measurement results show that the two detection methods can meet the requirements for accurate determination， and the test values are close to 27 μg?g^-1 and 31 μg?g^-1， which are significant lower than the industry standard limit value of 150 μg?g^-1. Compared with the ICP-AES method， the GFAAS method has lower detection limits， quantification limits and higher precision， so it is more suitable for the determination of tin residues in biodegradable occluder products. Both of the two detection methods have the characteristics of rapid analysis， accuracy， convenience and good accuracy， which can provide reference for the research of relevant standard methods and the evaluation of method precision and accuracy.